Mark Skinner CAT AMIMI
Trailers, Training & Compliance
Trailer Safety through Training and Education
about us
Trailer Safety through Training and Education with NTTA and IMI Accredited courses
About us, I am a time served mechanical engineer and completed a fully indentured apprenticeship with CAV Lucas back in the late seventies and early eighties. Over the last four decades I have had several business’s including light haulage, motor vehicle repair and maintenance and specialist vehicle and trailer conversions, I’ve worked in the motor trade at main agents, repairing cars, vans, commercial vehicle, bus and coaches and worked for two national plant hire companies.
From an early age I have had apprentices under my wing to train and coach to enable them to gain their qualifications. More recently I have been training and coaching an older population in things like Driver’s certificate of Professional Competence. This covers, load security, loading and unloading, tachographs, driver’s hours, winching, UK driving laws and regulations including the towing of trailers both domestic and commercial. Practical training covers repair and maintenance of trailers up to 3500kg,
https://uk.linkedin.com/in/mark-skinner-cat-amimi-b924345a
https://www.ntta.co.uk
https://ukruralskills.co.uk
fail gallery
mobile trailer services
Trailer Safety through Training and Education with the NTTA, IMI & UK Rural Skills Accredited courses
Consulting
If you require a specific training course to reflect your companies policies and procedures this can written accordingly. If you need advice on a trailer servicing and repair regime or the type of trailer which would suit your best.
Training
Training is a blended mix of theory and practical in the classroom and workshop. Test rigs are used to train off the job, and give hands on training and coaching as needed to gain experience by each candidate.
Compliance
Ensure you are on the right side of the law. This covers issues such as do i need a tachograph, what's is an "O" license, when should i service the trailer, do i need to use professional trades person or can my mate to repair my trailer and what paperwork do i need to have. What is a prohibition?
training courses
Maintenance of Trailers and Road Towable Equipment Under 3500kgs
2 Day course
A two day course covering all the aspects of trailer maintenance and servicing. Brake reline and coupling operation. Suspension, using leaf springs, rubber and pivot systems. Single axle , twin and tri-axle configurations. Tyres and electrics This course is accredited by UK Rural Skills https://ukruralskills.co.uk
Compliance
1 Day Course
This is one for duty holders, from transport manager, transport co-ordinators hire controller's and any one involved in logistics. The course covers the legal obligations of companies using trailers. The Road Traffic act and how it relates to maintenance and servicing of equipment used on the road. Type Approval and how it fits in with the Construction and Use Regulations. DVSA and there role in the keeping vehicles safe on the public highways. Finally what the future holds for trailer users.
Winching, Mechanically Fixed and Mechanically Portable
1 Day Course
Winch maintenance including cables The winching course is designed to give you an understanding of how the winch is used. Using the correct equipment and understanding the how to winch safely without injury. How to use snatch blocks for directional pulls and increasing the winch capacity. Understanding the Lifting Operations and Lifting Equipment Regulations.
Safe loading & unloading of trailers under 3500kgs
1 Day course
This course cover all aspects of loading and unloading a trailer. From pallets to excavators, plant, cars and machinery. From ratchet straps to chains. What to expect if stopped by the police or DVSA.
training courses
Dangerous Goods Safety Awareness
1 Day Course
Basic understanding of transporting dangerous liquids and gasses, and how to work out the legal quantity you can carry to remain under the threshold of ADR
Maintenance of Two Stroke or Single Cylinder Four Stroke Engines
I Day course
The one day course involves a full strip down of the engine into component form and complete rebuild including resetting the guvnor and carburettor. Full set of data and info sheets. This course is accredited by UK Rural Skills. https://ukruralskills.co.uk
Your course, designed for you
Company name
This specific course was designed for your business with your business in mind.
IBC Bowsers Pressure test and Inspection
1 day course
IBC 2.5 year pressure test 5 year pressure tests and inspection. Carry out full internal inspection and replace manway gasket and pressure test. These are required under ADR Regulations to ensure bowser does not rupture when being towed on the public highway.
training courses
Abrasive Wheels/cutting discs
I Day course
This course covers flat and depressed centre cutting and grinding discs. Health and safety regulations and the required PPE. Mounting of wheels for bench grinder, and on powered cut off saws.
Inspecting 01 & 02 trailers
1 Day Course
This course is designed for people who during their normal daily work have to inspect trailers under 3500kgs at the side of the road.
Tachograph and Working Time Directive
1 Day Course
This course focuses on using a tacho for towing a trailer "in and out" of scope and and the pit falls of not doing it as the law requires
Basic Mig Welding
1 Day Course
Under Construction
contact us
- 49 Whitecroft, Swanley, Kent, UK
- +44-07740 988053 - Mark Skinner CAT AMIMI
- markskinnerttc@outlook.com
- 8am to 5pm Monday to Friday
Please include your name and a contact number so i can contact you within the next 24HRS. If you phone and the call is not answered, it is probably because i am training so please leave a message and i return the call as soon as i can.